Cell MicroControls, P.O. 11387 Norfolk, VA 23517 Ph: (800) 398-4CMC Fax: (800) 398-9CMC Email: info@cellmc.com

Temperature Controller Accessories

Download flyer

BT-1-xx Tissue chambers

Note: all current tissue chambers have tapered inlet area.

BT-1

BT-1-AR

BT-1-13

BT-1-13B

BT-1-RR

BT-1-18

BT-1-TB

BT-1-TBS
BT-1-TBS with STIM-TB

: Application
Tissue chambers for study of isolated cells, small pieces of tissue or brain slices.

size platform 8.3 x 5.1 x 0.55cm
size central chamber
BT-1: 22.4 x 8 x 1.3mm [LxWxD], approx. 0.25ml volume, bevelled edges
BT-1-AR 16 x 5.5 x 1.3mm, approx 0.125ml, small volume chamber
BT-1-12A: 22.4 x 12 x 3.5mm, approx. 0.45ml volume, partly bevelled edges
BT-1-13: approx. 0.5ml volume, BT-1-13B has bevelled edges for lower solution levels and tapered inlet.
BT-1-18: 22.4 x 18 x 3.5mm, approx. 1.4ml volume
BT-1-RR: 28x11x1.3mm
BT-1-TB: 16.5x14x1.3mm approx 0.5ml for 12mm cover slides
BT-1-TBS: 16.5x14x1.3mm approx 0.5ml for 12mm cover slides, with field stimulation with STIM-TB
slit type inflow & outflow for laminar flow, thermistor groove
constructed of polycarbonate
compatible with HI-25, HI-25T
Don't see a chamber that is suitable. Call us about modifying our existing chambers to your requirements. Depending on the changes it may not cost any more than a standard chamber.

SA-LTEK2 LabTek Stage heater for LabTek chambers (2 window)

Application
Heating LabTEK chambers. Use with inverted or conventional microscope.

resistance nominally 3.3ohms
plugs into Heater Output of TC²_bip

HI-25 Heater-ITO transparent

Download flyer

Application
Heating BT-1-xx Tissue chambers or similar small tissue chambers. Use with inverted or conventional microscope.

transparent indium tin oxide coated heater
size 22x50x approx 0.25mm thick.
Heated area approx:18x45mm
resistance nominally 10ohm
max. operating temperature 70C
plugs into Heater Main of TC²_bip, TC-1

HI-25T/HI-24T Heater-transparent thin

Download flyer

Application
as for HI-25 but thinner for fluorescence (see transmission data) and/or microscopy studies.

HI-25T same as HI-25 except 0.14mm thick
HI-24T same as HI-25T except 40mm wide, heated area 18mmx35mm and with a resistance of 12.5ohms.

HI-55D/HI-57D Heater-transparent thick

Download flyer

Application
heating 30mm culture dishes, Nunc Lab-Tek chambers. Heater forms a platform

for dishes/chambers.
transparent indium tin oxide coated heater
size: 50x50(70)x»0.6mm thick.
resistance nominally 9ohm
max. operating temp. 70°C
plugs into Heater Main of TC2bip , TC-1

HLS-1P / HLS-8x.8P / HLS-8x1.3P Heater assy-lens, silicon

Application
objective heater and thermistor probe. heater size 20x70x approx 0.35mm thick. thermistor as for TH-10Km plugs into TC2-Ch3 also available as heater alone with banana plugs HLS-1. Heater dimensions: HLS-1P: 7x2cm HLS-8x.8P: 8x0.8cm HLS-8x1.3P: 8x1.3cm

TC2-Ch3 3rd Heat only channel

Application
optional channel for TC²_bip. Independent controller.

power from TC²_bip max. 8V, 1.5Amp output

fits inside TC²_bip

user installable

HC-1 Heater-concentric foil

Application
Heating 30mm culture dishes. Use with inverted or conventional microscope.

size 40mm outer dia. x 24mm inner dia.
resistance nominally 6.4ohm
constructed of a thin foil coated with Kapton insulation. Total thickness
0.35mm. One side coated with pressure sensitive adhesive.
max. operating temperature 100^oC
plugs into Heater Main of TC²_bip, TC-1

RW-10 (i) Resistance wire

Application
Capillary pre-heater or other special purpose heaters

RW-10: 3.3ohm/10cm uninsulated NiCr wire
RW-10I: 2.6ohm/10cm insulated NiCr wire

HPRE/HPRE2 Pre-heater

Download flyer

Application
3 loop capillary heater for pre-heating solution

HPRE/HPRE2 dims. 45x14x7mm (LxWxH) heater resistance approx 11ohm, 50ul dead volume. Suitable for flow rates from 0 to at least 4.5ml/min.
Thermistor sensor HPRE: 100ohm NTC HPRE2: 10kohm NTC
HPRE plugs into HPREC Control box
plugs into Heater Aux of TC²_bip

MPRE8 Multitube Pre-heater

Download flyer

Application
superfusion of cells or small tissue pieces

Dims. 10x0.3cm (LxDiam); heater resistance approx 11ohms.
Tip dead volume 1-2microl. Suitable for flow rates up to 1ml/min.
Thermistor sensor: 10kohm NTC
Plugs into Heater Aux or TC2-Ch3 of TC²_bip
Can use with SYRHT8K Syringe barrel heater kit to degass/pre-heat solutions

HPREC Control box (TC-1 accessory)

Application
Control box for HPRE capillary pre-heater

HPREC used with TC-1 with flow rates >2ml/min.
plugs into B output of TC-1.

TH-2Km Interchangeable thermistor probe

Application
mini 400 series compatible probe (approx. 0.45mm diam.).

suitable for shallow baths etc.
rugged alternative to the YSI-511
Rth @ 25^oC: 2225ohm
time constant max operating temp: 100^oC; 1m lead; 6mm plug
compatible with Main Probe input of TC²_bip

TH-10Km Interchangeable thermistor probe

Application
miniature thermistor probe (approx. 0.45mm diam.).

general purpose mini probe, submersible
Rth @ 25C: 10kohm
time constant max operating temp: 100C; 1m lead; 6mm plug
compatible with Aux Probe input of TC²_bip

TH-1 Thermistor probe

Application
miniature thermistor probe (approx. 0.35mm diam.).

suitable for shallow baths , point temperature measurement, submersible
rugged alternative to the YSI-511
compatible with YSI 43T series telethermometer Rth @ 25^oC: 2kohm+/-5%; beta approx 3000
time constant 20ms, plunge water
max operating temp: 100^oC; 2m lead; 6mm plug
compatible with Main Probe of TC²_bip

FL-1 Miniature positioner

Application
Adjusting bath solution levels, positioning ref. electrodes

size: base 13mm dia., overall height 24mm
adjuster height range approx 3mm; approx 0.5mm/turn
miniature block for clamping tube, electrode
spare spring wire for custom bending

TCAL Thermistor calibration software

Application
Accurate thermistor calibration. Using several test measurements (temperature, resistance) program computes the relationship between the temperature indicated on a YSI-Telethermometer and the actual temperature as well as Rth versus temperature.